Die-cut tape hi electronics, automotive, leh packaging industry-a auxiliary material pawimawh tak a ni. A performance stability hian production quality a nghawng nghal vek a ni. A dah dik loh chuan awlsam takin harsatna a thlen thei a, chu chu adhesive aging, adhesion tlahniam emaw, substrate deformation emaw a ni thei. A hlawhtlinna tur atan scientific storage management hi a pawimawh hle.
Environmental control is fundamental. Die-cut tape should be stored in a constant temperature and humidity environment with a temperature of 10-30°C and a relative humidity of 40%-60%. High temperatures (>35℃) chuan adhesive oxidation a ti chak a, chu chuan adhesion a hloh phah a; Temperature a hniam (<5°C) can make the substrate brittle and increase the risk of delamination. Excessive humidity can cause moisture absorption in the adhesive layer, impairing lamination; excessive dryness can cause the substrate to shrink and deform. Temperature and humidity monitoring equipment is recommended to avoid extreme conditions.
Classified storage leh protective measures te pawh chutiang bawk chuan a pawimawh hle. Tape hrang hrang (Pet, foam, leh non-woven fabrics ang chi) leh adhesive type (acrylic leh silicone ang chi) tape te chu a hranin dah tur a ni a, chu chuan cross-taksaa inhnawh tawnna avanga release paper a tihbawlhhlawh loh nan a veng thei a ni. Tape roll hawn loh chu an original packaging-ah seal-a dah tur a ni a, chu chuan leivut a awm loh nan. Die-Cut tape chu tuiah flat taka dah tur a ni-proof pallets. Adhesion emaw, backing emaw adhesion emaw cracking emaw a awm loh nan fold emaw, thil rit tak tak hnuaia dah emaw loh tur a ni.
A hmasa ber-in-first-out principle hi ngaihthah tur a ni lo. Inventory cycle tih tlem nan a siam chhuah ni angin hman tur a ni. A tlangpuiin, die-cut tape shelf life chu thla 6-12 a ni (a siamtute specification a zirin). Expired tape chu hman hmain adhesion leh a lan dan tur test leh tur a ni.
Environment management khauh tak, classified protection, leh inventory control hmangin die-cut tape-a performance stability kan ti tam thei a, production tha leh rintlak tak kan siam thei bawk.
